TECHNICAL CHARACTERISTICS
|
Supply voltage
|
12 ÷ 48Vdc
|
Phase current
|
From 400mA to 3A in 8 equally spaced steps by changing the dipswitch.
|
Current reduction
|
The nominal phase current is automatically reduced by 50% after 200ms
from the last step received.
|
Resolution
|
Full, half and quarter step resolution available.
|
Motor types
|
For stepper motor with 4,6 or 8 windings in serial or parallel mode.
Configurable for high and low inductance motors.
|
DIRECTION input
|
Optically insulated direction input. This input selects the CCW or CW rotation mode.
|
Clock input
|
Minimum width: 7us
Maximu step rate: 50KHz.
|
ENABLE input
(All windings off)
|
Optically insulated input.
This input enables the driver output stage and, when disabled, the motor is de-energized.
|
FAULT output
|
Open collector output, active low, used to signla the working condition to a PC or PLC
(max 50mA, 30Vcc).
|
Plugin modules
(optional)
|
Oscillator
Indexer with serial interface RS232 and RS485
|
IT
EN
(
