TECHNICAL CHARACTERISTICS
|
Supply voltage
|
12 ÷ 48Vdc
|
Phase current
|
From 400mA to 3A in 8 equally speced steps by changing the dipswitch settings.
|
Automatic current
BOOST/reduction
|
The nominal phase current is automatically reduced by 30%
after 200ms from the last step received.
|
Resolution
|
14 different resolution (decimal and binary)
up to 51200 steps/revolution (256 micro-steps) DIP-switch settings.
|
Motor types
|
For stepper motor with 4,6 or 8 windings in serial or parallel mode.
Configurable for high and low inductance motors.
|
DIRECTION input
|
Optically insulated direction input. This input selects the CCW or CW rotation mode.
|
STEP input
|
Minimum width: 1us
Maximu step rate 10MHz.
|
Enable input (All windings off)
|
Optically insulated input.
This input enables the driver output stage and, when disabled, the motor is de-energized.
|
FAULT output
|
Open collector output (max 50mA, 30Vcc), active low,
used to signal the working condition to a PC or PLC.
|
Optional plug-in modules
|
Oscillator with programmable ramp generator and analog input (±10V)
Indexer with serial interface RS232 and RS485
Intelligent controller
|
IT
EN
(
